Mother bosrd borken ram slot

I try put it in B1 and C1, and C1 and.
As a rule, each generation of memory technology has faster frequencies, runs on lower voltage, and boasts lower latencies than the generation of technology it succeeds.
I took one of the RAM sticks out, and it fixed the problem.
Before you replace the RAM socket, check if the northbridge has an issue and use a completely different set of memory.Find out how to deposit usd on kraken other ways to fix a slow computer here.I don't really know what could be causing the problem, somebody said that it could be a short from the backplate of the cpu cooler (Which shouldn't be the case for me, as my cooler has been on my pc since day 1).This post has been flagged and will be reviewed by our staff.I installed 2 RAMs originally in A1 and.Now, I give up and put it in C1 and D1 although the OS can only detect memory.Do not use a cheap station since the odds of damage are much higher.

The average person is better off running a single large memory module, since the repairs that are required to fix the board are very difficult.I have no idea what could have caused this.This tool analyzes your PCs configuration and automatically recommends a list of compatible upgrades in a matter of seconds.Find out more about DDR2 and DDR 3 technology here.After sometimes, I noticed only 1 RAM is detected.The difficulty of sourcing the part and doing the repair depends on which socket is bad but the top slot is much harder to replace then the bottom slot.If you're able to repair the board, here's a link to the guide to remove the motherboard: MacBook Pro 13" Unibody Mid 2010 Logic Board Replacement.When you use either of our compatibility tools, well do the compatibility research for you, and we guarantee compatibility when you order on m or your money back.What could have caused this?
I was just remounting my cpu cooler (which is a hyper 212 plus and after I did that my PC would not start.
If you determine the job is above your skill level, don't mess with the board and send it to someone who can do the job correctly.

If I put any stick of RAM in the Slot 1 I have errors in memtest86 and BSoD in Prime95.